Welcome to Duncan Rogers. |
Sign in |
My Account
0141 882 6211
You are here - All Product > Air Fittings > Wade brass Compression Metric & Imperial
|
Technical Details
|
Assembly Instructions
1. Ensure that the tube is cut square and is free from burrs.
2. Slip the coupling nut onto the body followed by the compression ring.
3. Insert the tube into the body of the coupling, ensuring that the tube is seated firmly against the abutment shoulder.
4. Hand tighten the coupling nut.
5. Ensure that the tube is straight at the point of entry into the coupling body and that the axies of the tube and body are aligned. If tube bending is required, then ensure that this is carried out prior to assembly of the coupling components. Do not bend the tube after the joint has been made as this will cause side loading which can be detrimental to the performance of the joint.
6. The number of turns required to make a leak tight joint is as follows: Universal olive (all sizes) 3/4 - 1 turn Type A brass ring (12 - 25mm) 3/4 - 1 turn
|
'For weeks I've been trying to find locally some copper tubing and fittings for a small design project to no avail. I came across Duncan Rogers on the web and within a couple of days had everything I needed! The website was very simple to use and it saved me a lot of aggravation - great resource!'
Alan Hunt, London
Your online payment will be handled by SecureTrading, the leading independent internet payment processor in the UK.
Credit card details are entered on a secure page (https secure padlock). They are fully encrypted using the most sophisticated e-payment software and also incorporate Verified by Visa & MasterCard SecureCode to ensure that your payment is secure.
Please complete the form on our contact page for a prompt response to your questions. If you wish to talk to one of our staff please call us on the numbers below or email info@duncanrogers.com
UK
Tel: 0141 882 6211
International
Tel: +44 141 882 6211
© 2024 Duncan Rogers | The Duncan Rogers website is owned by Duncan Rogers (Engineering) Ltd.
Duncan Rogers (Engineering) Ltd, 396 Hillington Road, Glasgow, G52 4BL Scotland.
